cute + easy Peplum Top Pattern and sewing tutorial

In today'due south post: Learn how to make this cute top with a free peplum top pattern and sewing tutorial. Make information technology shirt length to wear with jeans or tunic length to wear with leggings!

I had a friend over yesterday for a little sewing pow wow and she was surprised to find that I sew on a rather cheap Blood brother sewing auto (chapter link). Since I blog about sewing, she'd expected me to have something a bit fancier. I reminded her that near of my sewing is very basic: I like easy projects that I tin end quickly, and the things I sew together don't crave fancy stitches, multiple presser feet, or any of the other bells and whistles you get on an expensive machine. I don't have anything against pricey machines, I've just come to the conclusion that the machine I have meets my needs, especially when my virtually contempo project is another easy to stitch tunic.

I already shared a new free swing tunic sewing pattern and showed yous how I hacked my Breezy Tee design to make a tunic. Today's mail will show y'all how to turn my Classic Tee pattern into a Peplum Top Design. Actually, you lot can use this same technique to plow any t-shirt pattern into a peplum tiptop!

I made my peplum tunic length considering I desire more things to article of clothing with the LulaRoe knockoff leggings I plant on Amazon (affiliate link) for half the price, but you can make yours any length yous similar!

Peplum Top Blueprint

You'll want to beginning by clicking over to my Classic Tee postal service and downloading the pattern. It is a size large (well-nigh a 38 inch bust). If you are a different size, you can visit this post to find another complimentary t-shirt pattern you can use.

If you are using my pattern, impress it out at 100% or full size and butt the pages together without overlapping. Tape and cut out the design, choosing short or elbow length sleeves. Then piece the pattern right along the arrow under the word "stretch" as shown in the photograph below. This is right about the natural waist, and then if you desire your gathered peplum to exist fastened higher or lower, so slice the design accordingly.

Then it'south fourth dimension to cut out your pieces from fabric. I used 1.5 yards of prewashed knit (stretchy) textile. You *may* exist able to make this from woven (non-stretch) cloth, it just obviously won't have every bit much give, so don't do that unless you've made my Classic Tee before and know that it's roomy enough on you to fit in a fabric that doesn't stretch.

I laid the material down flat, then folded in each selvedge edge to come across at the middle. First, I cut off the top 14 inches and then cut that into 2 pieces that were each 14 inches tall and 30 inches wide. Then I cutting the front and back shirt pieces and two sleeve pieces, all on the fold as shown below. I also cutting a strip about 24 inches long and 1.75 inches high to utilize equally the neckbinding.

Now, one thing you will notice in looking at the photos of this shirt is that the peplum is non super gathered. It's not much wider than the shirt itself. I did this on purpose considering I don't like a lot of extra volume at my waistline, merely you can cut your rectangles for the peplum any width you'd similar. So if you want more gathers in the peplum, use 2 total yards of textile and and so cutting Two xiv inch strips off the tiptop instead of just i. Then you can cut your peplum pieces fourteen inches alpine by however wide you'd similar.

Hither are my pieces all cut out:

How to sew a peplum shirt

Starting time by sewing 2 rows of gathering stitches along the top (long) edges of the peplum pieces. I sew together the gathering stitches i/iv inch from the border, and and then just over 1/ii inch from the edge. Utilize pins to mark the bottom of the shirt piece in quarters, and so mark the top of the peplum piece in quarters as well. Pull on the bobbin threads to assemble up the peplum until it is the same width as the bottom of the shirt, as shown below.

Be sure to evenly distribute the gathers and match upward the pins. Then lay one shirt piece correct sides together with one gathered peplum piece, matching the pins, and run up together using a 1/2 inch seam allowance. Remove the gathering stitches, and printing the peplum downward:

Note: If you are using a very stretchy fabric, information technology'southward possible that the gathers will start to stretch out the bottom of the shirt piece, making it expect actually wide. If this happens, you lot'll desire to sew some narrow elastic into the seam yous just sewed to stabilize information technology. You tin can see an instance of that in this postal service.

In one case you've fastened peplum pieces to the front and back shirt pieces, y'all can keep to sew together up the shirt the same way as is described in the Classic Tee post.

Finish the neckline, hem the sleeves, and hem the bottom of the shirt. For my sleeves I cut the elbow length merely turned up a very wide hem. And so I rolled the bottom of the sleeve upward once to brand it expect cuffed.

I likewise curved up the sides of the peplum pieces and hemmed them Before sewing the side seams together.

Good luck making your ain new shirt with this peplum top pattern. Thanks for reading!

smithseemorger.blogspot.com

Source: https://www.itsalwaysautumn.com/cute-easy-peplum-top-pattern-sewing-tutorial.html

Share this post